|
 |
|
 |
|
|
|
|
|
MGL SmartSingles
|
|
SmartSingles ALT-1
- The top performing digital altimeter.
- Range to more than 40 000 feet.
- Units in meters or feet.
- Absolute as well as relative modes of operation.
- Accurate and high resolution.
- Vertical Speed indication.
- Weight: 90g approx.
- Download the manual (English): alt1_en.pdf
- Réf : MG_Sin_ALT1
- Ask for a Catalog/Price list
|
|
SmartSingles ALT-2
- Similar to the ALT-I, this model adds a RS-232 serial output with a selection of protocols. Supported are: Garmin/Trimble, IIMorrow and MGL.
Also see the CNV-ALT2 Serial to parallel interface for mode-c transponders without serial interface.
- Vertical speed indication.
- Weight: 90g approx.
- Download the manual: alt2_en.pdf
- Download the CNV-ALT2 manual: cnv-alt2_en.pdf
- Réf : MG_Sin_ALT2
- Ask for a Catalog/Price list
|
|
MaxiSingles ASI-1 & ASI-2
- Wide range airspeed indicator from a low 16mph to 250mph, also units in km/h and knots.
- Includes automatic flight log for the last 24 flights.
- Programmable "bugs" on analog airspeed display.
- Includes flight timer and air distance trip counter.
- Weight: 90g approximatly.
- Download the manual: asi1_en.pdf
- Réf : MG_Sin_ASI1
- Similar to the ASI-1, the ASI-2 has a RS-232 serial output.
- Réf : MG_Sin_ASI2
- Ask for a Catalog/Price list
|
|
SmartSingles ASX-1
- The unique ASX-1 combines our excellent altimeter with the wide range airspeed indicator of the ASI-1.
- This instrument is the ideal solution for limited space panels at an even more amazing price.
- Consider the ASX-1 together with perhaps a EMS-503 or EMS-582 for an unbeatable combination of utility, price, weight and size
- Weight: 100g appproximatly.
- Download the manual: asx1_en.pdf
- Réf : MG_Sin_ASX1
- Ask for a Catalog/Price list
|
|
SmartSingles AV-1
- The AV-1 "Airtalk Viewer" can display Attitude, Turn & bank, Compass data supplied by a
SPx module
- Choice ef dispaly via front panel keys and Menu.
- Weight: 90g aproximatly.
- Download the manual: ai1_en.pdf
- Réf : MG_Sin_AV1
- Ask for a Catalog/Price list
|
|
SmartSingles BAT-1
- Monitor your aircraft's battery supply.
- Voltage, charge and load currents.
- Can be used for Nicad or Lead-acid cells (including gel cells).
- Ideal instrument to monitor the charge performance of your electrical power generation system.
- Works with pulsed power sources such as chopper regulators (Motorcycle regulator/rectifiers).
- The BAT-1 can measure voltages up to +30V et charge/discharge currents up to 20A (dépending on shunt).
- Temporarily unavailable due to a component shortage.
- Download the manual: bat1_en.pdf
- Réf : MG_Sin_BAT1
- Ask for a Catalog/Price list
|
| EMS-503 2 strokes Air cooled Monitor | |
|
|
SmartSingles EMS-503
- The complete engine monitor for the popular Rotax 503 DCDI engine.
- A programmable rev counter allows this instrument to be used with other makes of air cooled two stroke engines.
- Rev counter, hobbs, flight timer, 2 channel EGT and 2 channel CHT plus alarms.
- Delivered with two EGT probes (MG_EGT) and two CHT probes (MG_CHT).
- And it's all precision measurements. Very cost effective and a breeze to use.
- Weight: 100g aproximatly.
- Download the manual: 503_en.pdf
- Probes and senders
- Ref: MG_Sin_EMS503
- Ask for a Catalog/Price list
|
| EMS-582 2 strokes Water cooled monitor | |
|
|
SmartSingles EMS-582
- A complete Rotax 582 DCDI engine monitoring system in one little instrument? You better believe it.
- A programmable rev counter allows this instrument to be used with other makes of water cooled two stroke engines.
- Rev counter, hobbs, flight timer, 2 channel EGT, 2 channel CHT and coolant temperature plus alarms.
- Delivered with 2 EGT probes (MG_EGT) and one température probe (MG_TS921).
- And it's all precision measurements. Very cost effective and a breeze to use.
- Weight: 100g aproximatly.
- Download the manual: 582_en.pdf
- Probes and senders
- Ref: MG_Sin_EMS582
- Ask for a Catalog/Price list
|
|
SmartSingles AV-1
- Perhaps the most comprehensive and easy to use fuel flow, fuel range, fuel endurance and fuel level computer available.
- The FF-1 can use our multiple range, low cost
fuel flow sender
as well as other "turbine" type senders.
- Can interface to an optional fuel level sender with full multi point calibration.
- Please note: We do not recommend usage of fuel flow based fuel level monitoring as primary fuel level display. Calculation of level from flow is a relative operation and subject to errors. This may only be used as secondary fuel level display for purpose of range and endurance calculations if a primary, direct indicating level display is available. This condition is met if you fit the optional fuel level sender.
- Includes fuel low alarm and alarm output.
- Weight: 90g aproximatly.
- Download the manual: ff1_en.pdf
- Probes and senders
- Ref: MG_Sin_FF1
- Ask for a Catalog/Price list
|
| FF-2 & FF-4 Fuel calculator | |
|
|
SmartSingles FF-2
- Building on the succesful concept of the FF-1, the FF-2 provides for a multitude of different operating requirements with 13 destinct modes.
- The FF-2 can interface to two fuel flow senders and two fuel tank level senders at the same time.
- The FF-4 is designed for injected engines. It connects to an injector control line and calculates fuel flow based upon injector opening time.
- Supported modes include single or dual fuel flows, differential fuel flow, single or dual tanks either using calculated levels or measured levels using multi point calibrated level senders.
- Fuel usage accumulators are also provides plus all the functions of the FF-1.
- Please note: We do not recommend usage of fuel flow based fuel level monitoring as primary fuel level display. Calculation of level from flow is a relative operation and subject to errors. This may only be used as secondary fuel level display for purpose of range and endurance calculations if a primary, direct indicating level display is available. This condition is met if you fit the optional fuel level sender.
- weight: 100g approximatly.
- Download the manual: ff2_en.pdf
- Probes and senders
- Ref: MG_Sin_FF2 for "Turbine" type senders
- Ref: MG_Sin_FF4 for injection engines
- Ask for a Catalog/Price list
|
|
SmartSingles GF-1
- Two axis G-force meter with memory and cycle counter.
- Measures vertical force at up to 10G at high accuracy.
- View the functions: GF1.jpg
- Features include:
- Recording of max and min G forces in permanent memory
- Two independent cycle counters which record the number of times a preset force has been reached
- Graphical display of force acting on the aircraft
- Waight: 90g approximatly.
- Download the manual: GF1_en.pdf
- Ref: MG_Sin_GF1
- Ask for a Catalog/Price list
|
|
SmartSingles MAP-1
- The MAP-1 is a precision pressure gauge which can measure pressures in the range from 0.25 bars (3.6 PSI) to 2.5 bars (36.2 PSI).
- Pressure can be displayed in units of millibar, bar, PSI, Kg/cm2, inches of Mercury, millimeters of Mercury, kilopascal (KPa) or atmospheres.
- The MAP-1 is primarily intended for use as a manifold pressure gauge, however, due to the universal nature of this accurate instrument it can be used for many other applications as well.
- Typical applications: Engine manifold pressure, Turbo boost pressure, Barometer, fuel or oil pressure gauge (with additional isolation kit), pressure reference, airfoil research and testing.
- Weight: 90g approximatly.
- Download the manual: MAP1_EN.pdf
- Ref: MG_Sin_MAP1
- Ask for a Catalog/Price list
|
|
SmartSingles RTC-2
- Real time clock with time zones, also includes timer, stopwatch and ambient temperature reading.
- Weight: 90g approximatly.
- Download the manual: rtc2_en.pdf
- Ref: MG_Sin_RTC2
- Ask for a Catalog/Price list
|
|
SmartSingles RV-1
- This baby is not just a rev counter. It is everything a rev counter should be.
- Fully programmable with hobbs meter and flight timer.
- Can be used with high speed RPM pulses or very slow speed pulses.
- Universal RPM counter for engines as well as universal RPM counter for Gyroplane and Helicopter rotors.
- Download the manual: rv1_EN.pdf
- Ref: MG_Sin_RV1
- Ask for a Catalog/Price list
|
|
SmartSingles RV-2
- The RPM / power factor display for turbine engines and similar applications.
- Can be used for N1, N2 using standard tach generators or almost any other electrical signal or pickup senders.
- Download the manual: rv2_en.pdf
- Ref: MG_Sin_RV2
- Ask for a Catalog/Price list
|
|
SmartSingles TC-1
- Ever wanted a totally flexible, one, two, three or four channel EGT or CHT monitoring system ?
- Fully configurable with external alarms - the total solution for any engine, big or small.
- Weight: 90g approximatly.
- Download the manual: tc1_en.pdf
- Probes and senders
- Réf : MG_Sin_TC1
- Ask for a Catalog/Price list
|
| TP-1 temperature & Pressure | |
|
|
SmartSingles TP-1
- Our universal solution for measuring water (coolant) temperature, oil temperature, oil or fuel pressure.
- Can be used to monitor any one of these or one temperature and one pressure at the same time. For example: Use one instrument to monitor both oil temperature and oil pressure.
- Uses standard automotive senders and can use our special MGL senders as well.
- Weight: 90g approximatly.
- Download the manual: tp1_en.pdf
- Probes and senders
- Ref: MG_Sin_TP1
- Ask for a Catalog/Price list
|
|
SmartSingles VSI-1
- Complete your cockpit with a digital vertical speed indicator (VSI).
- Includes logarithmic analog readout. This VSI has a range of +/-10.000 ft/m, can be set to meters/second readout and is altitude compensated.
- Includes a user calibration feature for the perfectionist pilot.
- Weight: 90g approximatly.
- Download the manual:vsi1_en.pdf
- Ref: MG_Sin_VSI1
- Ask for a Catalog/Price list
|
|
|
|
|
 |
|
 |
|
|