|
 |
|
 |
|
|
|
|
|
MGL Probes and senders
|
|
MGL Fuel Flow Sender
- Dual Range fuel flow sender.
- Using the small jet pictured in front of the sender body, fuel flow from 3 liters/hour to as much as 500 liters/hour is catered for.
- Compatible with 8mm and 12mm hoses and similar imperial sized hoses.
- Compatible with a wide range of fuels including those with methanol and alcohol content.
- Mechanical failure of the sender will not block the fuel flow.
- The fuel flow sender is compatible with all of MGL Avionics range of products.
- Successfully fitted to every possible engine type including large aero engines.
- 1.8m long cord.
- Weight: 80g approximatly.
- Englishe Bedienungsanleitung :
ffdoc.pdf
- Ref: MG_FFSend
- Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
| Kraftstoff-Durchfluss (Metal) | |
|
|
MGL Fuel Flow Sender
- Fuel flow range 1.14 to 114 L/h (0.3 to 30G/H).
- Compatible with a wide range of fuels including those with methanol and alcohol content.
- Mechanical failure of the sender will not block the fuel flow.
- The fuel flow sender is compatible with all of MGL Avionics range of products.
- Successfully fitted to every possible engine type including large aero engines.
- Weight: 80g approximatly.
- 1/4" NPT Threaded Input & Output.
- Pressure drop 0.6 psi @ 15 GPH /2.4 psi @ 30 GPH
- Repeatability 0.5% @ 16 GPH
- Die-cast Aluminum, Cadmium Plated, Dichromate Finish
- -65°C to +100°C
- 8454 pulses/liter@ 60l/h
- 3 x 22 Gauge Wire Leads, 45cm long.
- Weight: 80g approximatly.
- Englishe Bedienungsanleitung :
FF206A_US.pdf
- Réf : MG_FF201A6
- Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
|
Fuel Level guage interface
- Aloows to connect MGL instruments on an existing fuel level measurement system and keep original analog display.
- Two channels
- Two inputs for fuel level sender
- Two outputs for MGL measurement system (i.e. RDAC)
- Dimensions : 30 x 20 x 9mm environ
- Wiring length 15cm approx.
- Power supply 5Vdc (from MGL measurement system)
- Weight: 10g approx.
- Download the manual
FLInt.pdf
- Ref : MG_FLInt
- Request Catalog/Price list
|
|
MGL Abgas Temperaturgeber EGT
- Top quality, high temperature EGT probe.
This unit can be used up to 1200 degrees C (2000 degrees F) short-term and 1100 degrees C indefinite.
- Made from 310 grade stainless steel the probe will remain firm at high temperatures making this an excellent choice for turbo charged high performance engines.
- The probe is fitted with a 3 ft, stainless steel armored, mineral fiber insulated cable.
- Threaded type
The bolt has a 8x1 thread (Metric fine thread) as used by Rotax for their exhaust manifolds. The bolt is made from high tensile steel and is compatible with mild steel exhaust systems from a temperature expansion rate point of view
probe diameter 4.5mm, length 23mm.
- Clamped type
Max clamp diameter 60mm, width 12mm, thickness 0.7mm.
probe diameter 4.8mm, length 31mm.
- The probe is a "K-type" thermocouple.
- Französisch Bedienungsanleitung :
EGT_CHT.pdf
- Ref: MG_EGTProbe Bolt type
- Ref: MG_EGT_Clamp Clamp type
- Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
|
MGL Zylinderkopf temperatur CHT
- Currently we offer four different versions of our CHT probes.
- These are all "K-type" thermocouples and they come in sizes 10mm, 12mm, 14mm and 18mm.
- The sizes refer to the thread diameter of the spark plug the probes are used on.
- Most automotive engines use 14mm plugs, the Jabiru engine and Rotax 912/914 use 12mm plugs. The big Lycomings and Continentals use 18mm plugs. Some motorbike engines use small 10mm plugs.
- The probes are supplied with 3 ft of Teflon insulated cable, heat resistant to 300 degrees C.
- Französisch Bedienungsanleitung :
EGT_CHT.pdf
- Réf : MG_CHTProbe
- Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
|
MGL Connecteur Thermocouple "K"
- Male connector AND Female connector
- Max Temperature (Operation) : +220°C
- Max. cable diameter : 0,5 mm2.
- Male plug 62x20x8 mm (with Cable Caddy)
- Female plug 27x20x8mm.
- Delivered wih Locking Clip
- "K" type thermocouple Compatible.
- Ref: MG_Conn_ThermoK
- Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
|
MGL "K" type Thermocouple cable
|
|
MGL Öl-Wassertemperatur Geber
- This picture shows our precision temperature probe. It is based on a brass housing with a 1/8"-27 NPT thread suitable for Rotax water/oil cooled engines.
- Electrically isolated from the engine which is helpful in some installations (no measurement errors due to ground return)
- Accurate with a maximum installed error reading of less than 2 degrees over the full temperature range.
- Recommended for applications were exact water and/or oil temperature readings are required.
- Réf : MG_LM355
- Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
|
MGL Temperature Probe Precision
|
|
MGL Smart Gear Tooth Sender
- Smart Gear Tooth Sensor
- Hall-effect gear-sensing technology
- Dynamic Self-Calibrating Peak-Detecting Differential circuit
- Incorporates a dual-element Hall IC that switches in response to differential magnetic signals created by ferrous targets
- The GTS sensor is typically used to measure rotor speed RPM at the pre-rotation gear of a Autogyro aircraft.
- It is however equally at home in other applications where RPM can be obtained from gear teeth sensing.
- The GTS can be used with all MGL Avionics instruments for RPM measurement.
- Cable length 1m
- Dimensions: 30 x 12 x 10 mm
- Waight: 30g approx
- Operating temperature : -40°C to +100°C
- Supply votage: 4 to 24V
- Open Collector output
- Download the manual
gts.pdf
- Ref: MG_GTS
- Ask for a Catalog/Price list
|
|
MGL Kit Capteur Effet Hall
- Create an isolated RPM pickup
- Usable in all situations where rotation speed can be measured installing magnets and Hall effect sender.
- For Ultra, Enigma, RV-x, and all MGL instuments measuring RPM.
- Download the manual (French): cap_hall.pdf
- Download application note for JABIRU: NA_MGL_05.pdf
- Französisch Bedienungsanleitung : cap_hall.pdf
- Application note JABIRU: NA_MGL_05.pdf
- Réf : MG_Cap_Hall sans aimants
- Réf : MG_Cap_Hall_c avec aimants à coller
- Réf : MG_Cap_Hall_v avec aimants à visser
- Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
|
MGL Temperature Probe Precision
- Precision temperature probe
- Electrically isolated
- Accurate with a maximum installed error reading of less than 2 degrees over the full temperature range
- Typical use: Ambiant temperature measurements
- Ref : MG_Amb_Send
- Ask for a Catalog/Price list
|
|
|
|
|
 |
|
 |
|
|